home *** CD-ROM | disk | FTP | other *** search
- Path: jobe.shell.portal.com!jkesling
- From: jkesling@shell.portal.com (John Darrell Kesling)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: VXL RAM-32 problems...
- Date: 25 Jan 1996 16:16:41 GMT
- Organization: Portal Communications Company -- 408/973-9111 (voice) 408/973-8091 (data)
- Message-ID: <4e8ad9$4nq@news1.shell>
- References: <4btfiu$mca@nntp3.news.primenet.com> <986.6570T1321T2496@bgnett.no> <4dnbr5$1l5@news1.shell> <9601232109.AA003wl@intrnode.demon.co.uk>
- NNTP-Posting-Host: jobe.shell.portal.com
- X-Newsreader: TIN [version 1.2 PL2]
-
- John Rumm (john@intrnode.demon.co.uk) wrote:
- >John Darrell Kesling (jkesling@shell.portal.com) wrote:
- >: My son has the exact same setup and problem you describe. We were
- >: able to get the diagnostics to fail (report errors and not guru) by
- >: addressing the 32 bit memory high. That way the test isn't actually
- >: executing from the suspect memory.
- >:
- >: We have not been able to fix problem though. We swapped the memory
- >: chips around on the board expecting a different error but the failures
- >: were always the same. I suspect that his problem is one of the driver
- >: ICs and not a bad memory chip. Your luck may be better.
-
- >What speed are the RAM chips? and What setting have you got the memory
- >speed jumper set to?
-
- I don't recall at this point. It's been several months since we looked
- at it. I can check with my son and see. I do remember that we checked
- all of that stuff according to the docs and everything seemed in line.
-
- Do you have some suggestions?
-
- John
- --
- ----------------------------------------------------------------------
- John Kesling - jkesling@shell.portal.com or jkesling@norden1.com
- ----------------------------------------------------------------------
- WA8ZGO - via AX.25 packet radio WA8ZGO@W8HHF.OH.USA
- ----------------------------------------------------------------------
-
-